R200
Small chamber footprint with 0-1 L/min flow and a 150-250 mm turntable height range, suited to compact samples.
IP TEST WATERPROOF TEST CHAMBER
IEC60529 Oscillating Tube Test Chamber for IPX3 IPX4
Use this IEC60529 oscillating tube test chamber page to review a water spray test chamber manufacturer option for IPX3/IPX4 validation, with swing pipe sizes, flow range and construction details in view.
IPX3 / IPX4IEC60529 waterproof validation
R200 to R600Multiple swing pipe sizes
220V / 1KWLab-ready power profile
Core Specifications
Check The Test Range And Build First
The chamber is built for repeatable IPX3 and IPX4 testing, with adjustable control over spray angle, flow, swing speed and turntable settings.
Quality assurance teams and R&D departments can use the chamber to simulate controlled water spray and splash conditions while keeping the workflow repeatable and traceable.
| Model | No.HNT-IP34C |
|---|---|
| Standard | IEC60529:1989+A1 (IPX3, IPX4) |
| Swing pipe sizes | R200, R400, R600 |
| Flow range | 0-1 L/min, 0-2 L/min, 0-3 L/min |
| Swing angle | 120deg for IPX3, 350deg for IPX4, or customize |
| Material | SUS304 stainless steel |
| Power | 220V, 1KW |
Turntable speed1-5 r/min accurate control
SafetyLeakage, water shortage, short circuit protection
Swing speed120deg in 4s or 360deg in 12s
Use casesElectronics, automotive, household appliance and outdoor equipment validation
Test Matrix
Choose The Swing Pipe And Chamber Size
The model family separates into three practical setups. This helps a buyer match the chamber to the sample size and the test throughput they need.
R400
Mid-size option with 0-2 L/min flow and a 350-600 mm turntable height range for broader lab use.
R600
Larger setup with 0-3 L/min flow and a 550-1000 mm turntable height range for bigger assemblies.
Related Products
Compare Nearby Waterproof Test Equipment
These neighboring models help a buyer decide whether the workflow needs a spray nozzle tester, a handheld nozzle setup, or a high-pressure chamber.
IPX5 Tester
Useful for spray test workflows where a handheld nozzle profile is the closer fit.
Open product
IPX6 Handheld Tester
Fits buyers who want a handheld solution with a 12.5mm nozzle reference.
Open product
IPX9K Chamber
Best when the test program needs a higher-pressure waterproof validation stage.
Open productApplications
What This Chamber Fits Best
The site positions the chamber for validation teams that need controlled resistance testing rather than one-off demo spraying.
- Electronics manufacturingUse for enclosure and assembly validation where repeatable ingress checks matter.
- Automotive parts testingHelpful for components that face rain, splash and environmental exposure.
- Household appliance quality assuranceSupports testing teams checking protection behavior before shipment.
- Outdoor equipment developmentUseful when the product must perform after water spray or splash exposure.
Selection Checklist
What To Confirm Before You Send An Inquiry
Target Standard
Confirm whether the sample needs IPX3, IPX4, or both, then choose the matching swing setup.
Sample Size
Match the turntable diameter and height range to the product dimensions you will test most often.
Control Needs
Check whether you need customize swing speed, flow rate, or spray angle control for lab routines.
Related Reading
Three Notes That Shape A Better Setup
Each article focuses on a different decision: compliance, model choice, and product validation rhythm.
IP Waterproof Compliance
Good for buyers who want the chamber's compliance role framed against IP test expectations.
Read articleReliable IP Verification
Useful when comparing adjustable models and choosing a chamber that supports stable verification.
Read articleProduct Validation Workflow
Helps teams connect the chamber setup to repeatable product validation steps.
Read articleFAQ
IEC60529 Water Spray Test Chamber Questions
What does this chamber test?
The chamber is designed for IPX3 and IPX4 water spray and splash testing under IEC60529:1989+A1.
Which swing pipe sizes are listed?
The product page lists R200, R400, and R600 configurations.
What flow range is shown?
The listed flow ranges are 0-1 L/min, 0-2 L/min, and 0-3 L/min depending on the model.
What materials are used?
The swing pipe material is SUS304 stainless steel, chosen for corrosion resistance and durability.
What power supply is required?
The product page lists a 220V power supply and 1KW power requirement.
How should I start an inquiry?
Use the quote or contact path on HERONTEST to confirm the model, chamber size, and test setup you need.
